1. Knowledge Base
  2. Hardware and Installation

Installing a Ruptela model GPS tracker

Ruptela Quick installation manual for ECO4/ECO4+/ECO4 Light models

 

Select place of installation in a safe, dry and mechanically protected area. Avoid installation to places of direct sunlight and extreme temperature.

Install the device as far away as possible (minimum 1 metres recommended) from the radio antenna or other electrical devices to avoid any interference.

It is recommended to place GPS antenna behind the dashboard as close to the window as possible - see area in blue.

 

Correct Position                                    Incorrect Position          

 

Wiring Guide

Pin

Colour

Description

BAT +12/24V

Red

Constant Power

Chassis

Black

Ground

Din4

Yellow

Ignition

 

 

 

 

 

GNSS (GPS) status

Status



No GPS

Blink every 400ms

Accurate GPS

Blink every 1s

 

 

 

 

GSM

Status

 

No GSM

Blink every 200ms

GSM but no GPRS

Blink every 1s

GPRS connection

Blink every 4s

 

 

 

 

 

 

On completion please call Transpoco for testing and activation. You can call the Transpoco team at  +35319053881 

Please provide the following details:

  1. IMEI
  2. Vehicle registration number
  3. Mileage
  4. Vehicle make
  5. Vehicle model

Hardware which can be connected to a Ruptela GPS Tracker

PTO

Pin

Colour

Description

Din1

Pink

+ Digital Input 1 

Din2

Blue

+ Digital Input 2

Din3

White

+ Digital Input 3



 

 

 

Driver ID Reader

Ruptela

Connect to

Description

Chassis (Black)

Driver Id reader Yellow and Gray

Driver Id Ground 

1-wire DATA (Green/Yellow)

Driver Id reader White

Driver Id Data

Dout 1 ( Purple)

- Buzzer (Black)

Buzzer Ground

1-wire PWR (Red/White)

+ Buzzer (Red)

Buzzer Positive



 

 

 

 

Ruptela 13.56MHz RFID

Ruptela

Connect to

Description

BAT - 12/24V (Black)

RFID Grey

RFID Reader Ground

BAT + 12/24V (Red)

RFID Yellow

RFID Reader Power

1-wire DATA (Green/Yellow)

RFID White

RFID Data



 

 

 

Ruptela 125KHz RFID

Ruptela

Connect to

Description

BAT - 12/24V (Black)

RFID Grey

RFID Reader Ground

BAT + 12/24V (Red)

RFID Yellow

RFID Reader Power

1-wire DATA (Green/Yellow)

RFID White

RFID Data

Private Mode - switch solution

| Private Mode      0 Public Mode

Pin

Colour

Description

Din 3

White 

Digital Input 3

Constant Live

   

Ruptela Temperature Sensor

Ruptela

Connect to

Description

BAT - 12/24V (Black)

Brown

Temperature Ground

1-wire PWR +5V (Red/White)

Blue

Temperature Power

1-wire DATA (Green/Yellow)

Green/Yellow

Temperature Data