What's New?

Transpoco's Product Updates

November 2022

1) Filter on journeys in the Percentage Of  Journeys with Driver ID Used metric in the Dashboard

Package: Move + / Perform / Protect

When creating / editing the 'Percentage of Journeys Driver ID Used' metric in the Dashboard, you can filter out small journeys eg. exclude journeys without Driver ID with less than 2km driven. This will help customers with the compliance percentage as most of these small journeys are done in a garage.

2) WA List of Checks export in a new format

Package: Move + / Perform / Protect

When exporting the list of checks you can either select a CVS or Excel option. Both of them are downloaded in a new format where the questions are the titles of the columns in the file and each checklist submitted will be one line of this CSV / Excel. This helps customers to run different filters on the data.

Note: If in CSV format, each checklist will be exported into a different file. This is the reason your dowload will be ziped.

If in Excel format, different checklists will be exported into different tabs.

3) Request a fuel station update when no station is found

Package: Move + / Perform / Protect

When there is a 'No Station Found' in your fuel transactions report, you can click on the yellow button and then request a fuel station update. An email will be sent to Transpoco Support Team, we will fix the station and get back to you as soon as possible.

October 2022

1) Defects reported by drivers through the Driver App can be automatically created into the Maintenance section 

Package: Move + / Perform / Protect

If you enable this feature in the Walkaround Settings section, you will have all the defects reported by the drivers automatically created in the Maintenance module. You can also set a default Garage for these services automatically created. 

2) The metrics 'Total Checks Done' and 'Total Defects Reported' are available in the Dashboard

Package: Move + / Perform / Protect

The 'Total Checks Done' metric will show the number of checklists submitted by drivers in the period selected. The 'Total Defects Reported' will show the number of defects reported by drivers in the period selected.

3) The driver's name (if any) will be shown in the Walkaround alert for vehicles driven without a check being completed 

Package: Move + / Perform / Protect

If the vehicle is assigned to a driver or the driver used a driver identification, this walkaround alert will show the driver's name with the vehicle registration.

4) Alerts are automatically applied to vehicles based on the vehicle groups they are in.

Package: Move / Perform / Protect

When you set an alert to a specific vehicle group, all vehicles added to this group will be automatically assigned to this alert. The same happens if you take a vehicle out of the group. In this case, the vehicle will be unassigned from the alert.

September 2022

1) The Driving Summary can be set as a Scheduled Report now.

Package: Move / Perform / Protect

The Driving Summary report which shows Driver Performances can be sent to users when set as a scheduled report. It can be sent on a daily, weekly or monthly basis.

For more details, you can read this article.

2) Audit Logs enabled to all Default Admin users 

Package: Move / Perform / Protect

The objective of the audit logs is to log and display changes done in the system. Example: If a new scheduled report is created in the system, this section will show what scheduled report was created, when and who created it. If there are any changes in future, the edition will also be logged and displayed in the Audit Logs section.

You can use the filters provided like period, etc. And also click on the eye icon for more details.

For more details, you can read this article.

3) Fuel Purchase Report direct link to the Fuel Transactions Report

Package: Move + / Perform / Protect

If you click on the purchase quantity in the Fuel Purchase Report, there is a link direct to the Fuel Transactions Report in order to show you the transactions taken into account for this quantity. 

For more details, you can read this article.

4) 'Vehicle Groups' column added to the 'Users' list

Package: Locate / Move / Perform / Protect

The vehicle groups column was added to the list of users so you can see at a glance the vehicle groups which each user has access to.

For more details, you can read this article.

August 2022

1) Fuel Purchase Summary Report

Package: Move + / Perform / Protect

The objective of this report is to show all the purchases made and distance driven by vehicle for the period selected. You can also export it as usual. In this report you will see the all the purchases from the period selected, not the consumption.

For more details, you can read this article.

2) Have all fuel transactions from a card assigned to a specific vehicle

Package: Move + / Perform / Protect

If you have non-tracked vehicles and/or want to desconsider GPS checking for your purchases, you can assign a vehicle to a fuel card and/or add a registration to a card description to match with the vehicle declared at the till by the driver. It means that all transactions from the card will be automatically assigned to the vehicle related.

For more details, you can read this article.

July 2022

1) Driver Mileage Summary Report

Package: Move / Perform / Protect

The objective of the Driver Mileage Report is to summarize the distances driven in business and private mode. The report can be exported and also filtered by a selected time period, vehicle group, vehicle, driver group and driver.

Note: For journeys with no driver ID identified, the report will group them as "Unknown Driver". In case the system has a fob used during journey but this fob wasn't assigned to a driver, the report will show the ID number next to "Unknown Driver".

For more details, you can read this article.

2) Electric Vehicle (EV) Suitability Report Customisation

Package: Perform / Protect

You can customise the range brackets for the EV Suitability Report and also set the limit for the "% days below / above X km when driven" in Settings - see the example below. 

Note 1: Any change you make will only change the EV Suitability Report in your profile, not for other users. 

Note 2: You can also attribute different colours to the ranges in order to help you with the data analysis at a glance.

For more details, you can read this article.

3) Driver Group filter for the ranking position in the Driver App

Package: Perform / Protect

The objective of this Driver Group filter option added to the Ranking is to help the drivers with a more relevant ranking position compared to the other drivers from the same group. e.g.: If there are 200 or 300 drivers in a fleet the rank becomes irrelevant. To solve this problem, the driver can search for his rank in one or more Driver Groups. 

Note: The setting of the driver groups which should be displayed per driver needs to be done in the Driver section when registering / editing a driver. You can then give them the proper permissions.

For more details, you can read this article.

4) Protection against brute-force attacks that target a single user account.

Package: Locate / Move / Perform / Protect

If a user enters their password incorrectly 10 or more times they will receive an email like the one below requesting them to Unblock their account. The following steps are followed:

• Lock the account temporarily if there are a number of consecutive failed  

logins on an account (e.g, 10) 

• Send an email to the registered owner of the account indicating that the  

account has been locked out due to the multiple failed login attempts. 

• Present a generic error to the user.

For more details, you can read this article.

5) Internet Explorer 11 will end in August 2022

Package: Locate / Move / Perform / Protect

The IE11 browser will not be supported after August 2022 which means you won't be able to access your Transpoco account via IE11 after August 2022. All other browsers will keep working as usual. e.g.: Chrome, Microsoft Edge, Firefox, etc.

May and June 2022

1) Transpoco hosted a free webinar explaining how your fleet can transition to electric vehicles. The main topics are listed below:

  • How our new EV Suitability report can help you to identify vehicles which can be replaced by EV vehicles.
  • How to monitor EV charging data using our new EV Charging report.
  • Learn from our experiences helping private and public sectors fleets to transition to EV fleets.

Note: If you were not able to attend the webinar, you can watch it here at your convenience.

2) The Multifactor Authentication option is available to be enabled 

Package: Move / Perform / Protect

Only users with Administrator privilege have access to the Security section. In this section, you will find the multi-factor authentication option which can be enabled to all your users, including you, except user logins to the Driver App. Once this is enabled, a second factor will be required to login to the system which means users will be required a 6 digit code after entering username and password. 

For more details, you can read this article.

3) The vehicle distance driven was added to the Driving Summary report and export.

Package: Move / Perform / Protect

When running an analysis over the Driving Summary data, you can not only see the tracker alert events but also the distance driven.

For more details, you can read this article.

4) A checklist filter was added to the Walkaround reports

Package: Move + / Perform / Protect

You can filter your "weekly view" report and/or "list of checks" report by one of the checklists you are using at a time. This will help you to see at a glance which vehicles have a specific check done during the week selected.

For more details, you can read this article.

April 2022

1) Electric Vehicle Suitability Report

Package: Move + / Perform / Protect

The objective of this EV Suitability Report is to assist you on choosing vehicles to be changed to electric.

Note: At the moment, the distance ranges and the 150 km are fixed in the system, but they will be able to be customised soon.

For more details, you can read this article.

2) Pre-set Profile Options Available

Package: Move / Perform / Protect

The system provides 4 different default profiles which are: 

* Admin - With access to the whole system based on the package chosen;

* Standard Viewer - Won't have access to the Settings menu option;

* Email Only - Won't have access to the system but it can be set as a recipient for alerts and scheduled reports.

* Custom -  Customised access 

For more details, you can read this article.

3) Internet Explorer 11 will end in August 2022

Package: Locate / Move / Perform / Protect

The IE11 browser won't be supported anymore after August 2022 which means you won't be able to access your Transpoco account via IE11 after August 2022. All the other browsers will keep working as usual. e.g.: Chrome, Microsoft Edge, Firefox, etc.

March 2022

1) Block speeding alerts in specific locations

Package: Move / Perform / Protect

You can create custom locations where you don't want to receive speeding alerts when above the speed limit. This will be automatically applied to all your vehicles. e.g: toll locations

 

For more details, you can read this article.

2) Electric Vehicle Report

Package: Move + / Perform / Protect

With this report you will be able to check all your charging details like battery level, distance travelled, KHW charged, location, etc.

For more details, you can read this article.

3) Natural Gas and Electricity Carbon Footprint added to the Carbon Footprint Calculations Report

Package: Move + / Perform / Protect

You can not only see the total carbon footprint purchased in your account per period but also by product type like Diesel, Petrol, Natural Gas and Electricity.

February 2022

1) Apply different shift times to some of your Scheduled Reports

Package: Move / Perform / Protect

You can apply customised shift times to the following reports in the Scheduled Report section: Fleet Summary, Summary, Journeys, Idling, Idling/Stops and/or Stops.

For more details, you can read this article.

2) Create customised checklists for your drivers.

Package: Move + / Perform / Protect

You can create customised checklists using our checklist builder. You can also hide/unhide a checklist for your drivers into the Driver App.

For more details, you can read this article.

3) New filter available for the Fuel Transactions Scheduled Report (Fuel Type Match)

Package: Move + / Perform / Protect

This filter permits you to have a report on transactions which don't match the vehicle fuel type with the purchase product. e.g.: If the vehicle fuel type is petrol and the purchase product is diesel, this report can display only these unmatches when selected the option "No".

For more details, you can read this article.

4) Hours driven / Operating hours added to the Service creation

Package: Move + / Perform / Protect

If the option "Travel Time" is selected, the vehicle hours driven (opering hours) will be displayed to help you with this alert setup.

For more details, you can read this article.

December 2021 and January 2022

1) Notifications report can be sent by email via the Scheduled Report function

Package: Move / Perform / Protect

You can receive the Notifications report by email when setting a Schedule Report for it.

For more details, you can read this article.

2) Filters added to the Fuel Transaction report

Package: Move + / Perform / Protect

You can filter your fuel transactions report by vehicle groups or vehicles.

For more details, you can read this article.

3) Changes done in the Data Processing Terms

Package: Locate / Move / Perform / Protect

The links to the Transpoco's Record of Processing Activities (ROPA) and our GDPR page were added as part of these Terms.

For more details, you can read this

4) Internet Explorer 11 will end in August 2022

Package: Locate / Move / Perform / Protect

The IE11 browser won't be supported anymore after August 2022 which means you won't be able to access your Transpoco account via IE11 after August 2022. All the other browsers will keep working as usual. e.g.: Chrome, Microsoft Edge, Firefox, etc.

November 2021

1) The Speed Summary report from the Driving Style Module had the locations added to the CSV files when exporting it

Package: Move / Perform / Protect

Now you can see the locations on the downloaded Speed Summary reports.

For more details, you can read this article.

2) Edit the Checklists' title, hide, unhide, and delete them

Package: Move+ / Perform / Protect

You can edit a checklist title, hide, unhide, and delete them in order to have a better management.

For more details, you can read this article.

3) New dashboard metric: Carbon Footprint

Package: Move+ / Perform / Protect

The Carbon emission can be added to your Dashboard as a new widget. All the default filter options are available in this metric. 

For more details, you can read this article.

October 2021

1) A new way to create vehicle groups

Package: Move / Perform / Protect

You can create a vehicle group in an easiest way, filtering vehicles using any column present on the list. You can also select all at once and create vehicle groups faster than before.

For more details please read this article.

2) New fuel provider: Jigsaw

Package: Move + / Perform / Protect

You can request Transpoco to automatically import purchases from Jigsaw provider, helping you to manage your fleet fuel consumption more accurately.

 

For more details please read this article.

3) Improving the knowledge base

Package: Move + / Perform / Protect

We added a link to the fuel page to redirect you to our knowledge base where you will find all the steps to get the most out of the Fuel product.

For more details please read this article.

September 2021

1) The total number of vehicles was added beside each vehicle group name in the dashboard.

Package: Move + / Perform / Protect

You can view the total number of vehicles between brackets beside each vehicle group name when choosing vehicle groups for the metrics in the dashboard, and also view the total number of vehicle groups selected on the top right of each widget.

                           

For more details please read this article.

2) A new type of Scheduled Report was added to your Synx: Walkaround Defects report. 

Package: Move + / Perform / Protect

You can generate a schedule report for the Walkaround defects reported by your drivers.

         

For more details please read this article.

3) Driver's contact number added to alerts where drivers are identified.

Package: Move + / Perform / Protect

If the driver is identified in the alert and the contact number is properly set in the system, the alert will bring both information in the email. Please check the example below:

For more details please read this article.

July & August 2021

1) Additional column options that can be added to Fleet Summary Export

Package: Locate / Move / Perform / Protect

You can add additional columns to your Fleet Summary Export by running the report for the desired time period and clicking the icon to export the data from the report. You will then see a popup like the one below:

For more details please read this article.

2) Different filters you can apply to your Summary Scheduled Report data.

Package: Move / Perform / Protect

You can apply various filters to your Summary Scheduled Report data. The available filters are based on the columns of the original report. You can choose between 3 standard operators: "equal to", "greater than" and "less than". The unit of the value depends on the selected parameter. E.g.: Drive Distance > 100 km per day or Drive Duration < 10 hours per day.

For more details please read this article.

June 2021

1) You can check the total cost of your fuel transactions, filtering by product or any other purchase detail.

Package: Perform

In the example below, it's filtered by Diesel UK product and you can see not only the total price per transaction but also the sum of the costs at the bottom.

For more details please read this article.

2) Services Scheduled Report (filtered by status: all, pending, overdue, complete)

The Services report is related to the services created in the Maintenance module.

Note: When selecting the ‘Services’ as your chosen Report Type, the Vehicle and Driver filters are not applied on this type of report.

You can select the Service Status as a filter to your report (All Status, Complete, Pending or Overdue).

For more details please read this article.

3) Flag multiple transactions done in the same day

If you have a card which was used to purchase fuel twice or more in a day, the system will flag this to you in the Fuel Transactions report.

For more details please read this article.

4) Switch to an Electric Vehicle Fleet with Transpoco solutions

Companies operating vehicle fleets are increasingly accepting the need to meet their responsibility to contribute to the Net Zero 2050 emissions targets within their local economies by replacing some or all of their current fleets with Electric Vehicles (EVs).

How can we help?

In addition to selecting the right type of vehicle, Fleet Managers faces the challenge of obtaining the necessary information on current fleet activity, deciding which types of vehicles are best suited for replacement with EVs, and once an EV has been selected, extracting the data that will enable effective monitoring of vehicle and driver performance.

Transpoco, has identified three key areas where our solutions can facilitate the transition to EVs:

1. Which vehicles should be transitioned to EV?

A suitability check for switching to an EV can be carried out, which includes information such as current driving profiles, vehicle dwell time and driver behavior data.

2. EV range anxiety and charging management

Ability to extract data showing vehicle battery level and charging performance, data to mitigate vehicle range anxiety and a Fleet Manager's overview of fleet vehicle performance. These are key differences in managing an EV fleet versus non-EV vehicles.

3. Providing data on ongoing improvements in carbon footprint reduction

Monitoring the effectiveness of the EV fleet using specific energy management reporting indicators, such as battery level, is essential for providing data on vehicle efficiency, operating costs, maintenance and lifecycle.

For more detail please contact us at sales@transpoco.com

May 2021

1) You can add extra columns with vehicles information to the Fleet Summary Schedule Report in your account

Package: Move / Perform

The new option “Extra Columns (Fleet Summary Report)” will appear at the bottom of the Scheduled Report creation screen. Then you can add extra columns wiith Vehicles information to your scheduled report. 

For more details please read this article.

2) Driving Summary Score in your Dashboard

Package: Perform

You can add the Driving Summary Score to your dashboard. It indicates the overall driving summary score of selected vehicles/vehicle groups during any specific period.

Note: This score takes into consideration the same settings from the Driving Style module.

The image shows the driving summary score per vehicle group (split per group option) (with comparison period - two different periods): 

For more details please read this article.

3) Transpoco Launches New Transpoco Protect Programme

Package: Perform + Synx Vision AI

Transpoco Protect, a fleet safety programme that focuses on driver safety and fleet Insurance costs reduction.
The introduction of the Fleet Safety Programme came from a collaboration with Actavo, an existing client. Working closely and understanding their needs it was very clear they wanted to go a step further from forward-facing camera technology and move to a solution that helps to in-cab coach the drivers and focus on preventing collisions in line with their safety first message across the group.

Please contact support@transpoco.com for further information.

April 2021

1) Option to send recurring messages to your fleet drivers in the Message Module

Package: Move + Maintenance / Maintenance / Perform

You can send recurring messages now via the message module in your Transpoco Synx account. They can be sent via SMS or Email. The recurrency can be daily, weekly, monthly and yearly. You can also choose an end time for them.

For more details please read this article.

2) Transpoco Launches New Integration Fuel Partnership with Johnston Fuel cards

Package: Move + Maintenance / Maintenance / Perform

The new partnership will allow Transpoco’s customers to benefit from the ability to integrate fuel card data in the UK across multiple fuel card providers, monitor transactions, capture data, and instantly verify fuel transactions. Whilst also having live vehicle location, journey history, and speeding reports.

Back office staff will have the ability analysis location alerts for when vehicles enter or leave specific fuel stations. This partnership gives customers the full picture and further helps to reduce admin time, loss of fuel, and revenue.

For more detail please contact us at support@transpoco.com

3) Check out your Settings - Set up and show different shift times in your reports

Package: Move + Maintenance / Maintenance / Perform

You can set up your customized shift times, and also filter out your fleet reports by the specific shift times that you set up in your Transpoco Synx account.

There are two default shift time settings in your account:

  • Working hours (09:00 - 16:59, Monday to Friday)
  • Outside working hours (00:00 - 08:59 & 17:00 - 23:59, Monday to Friday + the whole weekend)
Only a few companies have it available now as beta testers. If you want to have it available, send a request to support@transpoco.com.

Note: Only few reports have the shift time available

For more detail please read this article.

 

February and March 2021

1) Link between your Walkaround defects and services created to address them.

Package: Move + Maintenance / Maintenance / Perform

You can see the service information related to the defects reported in the Walkaround checks.

 

For more details please read this article.

2) New Business Vehicle Tracking Partnership with Workpal

Package: All packages

WorkPal is a software solution developed in-house to help manage mobile workforces. The new partnership will allow Transpoco’s customers to benefit from the ability to remotely schedule and assign jobs to field operatives, monitor job progress, capture data and instantly invoice clients.

 

Please contact sales@transpoco.com for further information and a demonstration of the software.

3) Fuel checking for non tracked vehicles (without GPS coordinates)

Package: Perform

The system is now able to do fuel checks for non tracked vehicles (without GPS tracking). It will look for the vehicle registration given by the driver at the till and/or for a vehicle registration that can be set at the card description by the Fleet Manager. If the purchase data matches with the registration, then this purchase will be assigned to this vehicle. 

 

For more details please read this article.

January 2021

1) Fleet Summary: Filter the Fleet Summary report by Weekdays or Weekends

Package: Locate / Move / Perform

You can filter the "Fleet Summary" report data by weekdays or weekends additionally based on the chosen period of date. 

 

If you choose the “Weekend Only” option, the report will bring the data related to the weekends (only Saturday and Sunday) from the period selected. The “Weekdays only” option is taking into consideration Monday to Friday days from the period selected.

 

For more details please read this article.

2) Tracker Units and Camera issues into your Notifications page

Package: Move / Move+ / Perform

The Notifications page will work like a "Hardware Health Check" page where you can see issues with your tracker units and/or camera.

Note: This is a new feature and it is currently rolling out.
If you don't have it enabled yet, you can request it to our Support Team on support@transpoco.com and we will make it available for you.

You can see a table in the Notifications page that includes: vehicle, make/model, date of event, category, event type, event duration, status and notes. Different filters can be applied to your search and the results are exportable.

For more details please read this article.

3) Dashboard: Check the Driver ID usage by vehicle group

Package: Move+ / Perform

You can add the metric called “Percentage of Journeys Driver ID Used” and split it by the vehicle groups from your choice.

For more details please read this article.

4) Extra security layer - IP address access restriction

Package: Perform

You can turn on/off the IP address access restrictions feature in order to give you an additional layer of security.

Note: The IP addresses you add here will be the only ones with access to your account. For more details please read this article.

December 2020

1) Customised time between questions on the Walkaround checks

Package: Maintenance / Perform

After the checklist is selected in the Driver App, the driver will start to answer the questions from the checklist and  the app will show a Warning by default if the driver is answering too fast (less than 5 seconds).

 If you want to customise it please contact our Support Team at support@transpoco.com.

 

For more details please read this article.

2) Search for specific questions/answers on the Walkaround and export them accordingly

Package: Maintenance / Perform

By typing in the search box, the system will look for the word(s) in the list of checks done, e.g. instruments. Note: The results will filter as you type.

Exporting the results accordingly:

For more details please read this article.

3) Check the Average Fuel Consumption by vehicle group

Package: Move + / Performance

Once you choose the “Average Fuel Consumption” as the Metric type, you will see the "Split per Group" option available.

Then, you will be able to see the “Average Fuel Consumption” value by vehicle group:

Note: At the moment, all vehicle groups will be taken into account. In future, you will be able to pick the vehicle groups you want.

For more details please read this article.

November 2020

1) AI Camera Alerts Report 

Package: Additional to Packages (Move / Perform)

The AI Camera Alerts Report shows each single alert triggered by the camera(s) installed in the vehicle with the event time, video and snapshots. 

There are two types of camera: one is the Front Face camera which faces the driver with Artificial Intelligence (AI) functions and the another one is the camera which faces the road with advanced driver-assistance systems (ADAS).

 

Note:  You can view examples in this article.

You can also request any video recorded by clicking “Request video” on the top right corner of the report.

For more details please read this article.

2) AI Camera Metrics in the Dashboard

Package: Additional to Packages (Move / Perform)

You can add the AI Camera metrics to your Synx Dashboard. The metrics are based on the alerts set in the cameras. You will be able to see the number of alerts for the period of time selected, vehicle, vehicle group and based on other filters available.

For more details please read this article.

3) Terms & Conditions + Privacy Policy link

Package: All packages.

You can easily access the Terms & Conditions with the Privacy Policy through a new link available in the system.

4) Get in Touch link

Package: All packages.

You can easily contact our Support Team through a new link available in the system.

October 2020

1) Average fuel consumption metric in the Dashboard

Package: Additional to Packages (Move / Perform)

If you want to know what is your fleet average fuel consumption or even for a particular vehicle group,  you can now add this metric to your Dashboard.

The screenshot above is showing the average from October to November as displayed in the period filter on the top. You can also compare the average fuel consumption from different periods.

For more details please read this article.

2) Creating a service based on the odometer value rather than distance

Package: Maintenance / Perform / Additional to Move Package

When creating a new service you will be able to see the current odometer value of the vehicle selected and the odometer for the next service.

For more details please read this article.

3) Filter to see and export only defects / no defects in the WA web module

Package: Maintenance / Perform / Additional to Move Package

Filter by Status so the results only show those with a defect or only those No defect (Note: Default is ‘All Status’) by clicking on the down arrow to the right of ‘Status’.

Note:  The green thumbs up represents checklist done with No defects. 

            The red thumbs down represents checklist done with Defects.     

You can also export  the results that you have selected by clicking on the "Download Table (.CSV)" option highlighted above.

For more details please read this article.

September 2020

1) Electric Vehicle Reports (Canbus) - REAL-TIME BATTERY STATUS REPORTING

Package: Additional to Packages (Move / Perform)

These reports are exclusive to CANbus installed in electric vehicles

Initial fields are displayed on active map to show vehicle battery status with other standard parameters such as Speed / Location / Driver ID / Battery Level / Charging State etc

This feature enables the visualized data points where vehicles are being charged and the duration of it being charged. It also provides a report logging all of the charging activity for the vehicles (depending on vehicle type) with location and duration of charge.

Monitor and manage Battery Levels and Charge Points, identify opportunities to improve the fleet functionality by building bespoke alerts / reports on key EV activity

ev real time display

For more details please read this article.

2) Applegreen Fuel Provider

Package: Perform 

We worked on this feature to get customers to  get their fuel transactions seamlessly sent to us daily directly from Applegreen so the translations are automatically loaded onto the customer fuel account.

Prior to setup up your Applegreen account, you need to send to Transpoco an email (using the template provided) to authorise use of your Applegreen account so they can start sending daily file with fuel transaction to our FTP site. These transactions are then automatically loaded onto your fuel account.

For more details please read this article.

August 2020

1) Speed Trend Report

Package: Perform

The Speed Trend shows the total percentage of speeding events by vehicles over different time periods like past 3 weeks for instance. The default is a stacked graph, but you can change this to a line graph.

For more details please read this article.

 


 

2) Speed Improvement Report

Package: Perform

This information shows how much drivers have reduced (improved) their speeding events, or not, over different time periods. Positive numbers mean more speeding events (not improved) and negative numbers mean less speeding events (improved).

 

For more details please read this article.

 


3) Driving Style inside Driver App

Package: Perform

Your drivers will be able to access their own data inside app without knowing about the other drivers. Only for the Fleet Managers will be displayed the top 5 most "dangerous" drivers data. 

Driving Summary: Your Drivers will be able to check their Speeding, Harsh Braking, Rapid Acceleration and Harsh Cornering percentages (depending on what is set in the Web solution).

Speed Summary: Your Drivers will be able to check their Speeding regarding the percentage over Speed Limit (depending on what is set in the Web solution).

Driving Trend: Your Drivers will be able to check their score for the past days / weeks in a trend graphic which will help them improve their safety each day / week.

Driver Rank: Drivers Rank is based on your drivers’ score from the day before which means the Rank can change on a daily basis. Fleet Managers can follow it from the Driving Summary (in the Web solution) which is ordered by score as well.

 

 

 

    For more details please read this article.

     


     

    July 2020

    1) Brand new layout for the Temperature Reports

    Package: Move + / Perform + "Adittional Temperature Option"

    With the addition of a temperature probe into your GPS telematics hardware you can monitor temperature in real time and historically.

    You can view the temperature details at any points on the graph by putting your cursor at the specifc point. 

    temperture

    For more details please read this article.

     


     

    2) Alerts for Temperature

    Real-time Alerts notifying key stakeholders of any critical temperature changes within pre set thresholds can be configured. 

    Annotation 2020-06-16 105102

    For more details please read this article.